Mini T
4
6
Outdoor Range
© Copyright 2004 - 2009 The Fire Company Pty Ltd - International Patent Pending - Trademark Registered - All Designs Registered.
www.ecosmartfire.com
Installation Requirements
In all cases the EcoSmart™ Fire should be placed in a secure, level position prior to being operated.
Equipment required:
phillips head screw driver, flat head screw driver.
1. Confirm you have received all necessary fixings as illustrated.
2. Position the fireplace in accordance to the compulsory minimum clearances.
Glass Panels
3. Place two (2) U-profiles (part A) into frame located at the top of the Mini T base. Position them to the side
of the outer hole as illustrated.
4. Take one (1) glass panel and insert with pre-drilled holes at the bottom of the panel. Push down firmly to
lock into position. Ensure corner brackets are not obstructing the area.
5. Insert two (2) screws (part B) into holes provided, gently tighten.
Repeat steps 3, 4 and 5 for the remaining three (3) glass panels.
6. Align and secure glass panels to a 90º angle by tightening the four (4) corner brackets and the plastic screws
(already in place). Adjust until all four (4) glass panels are at 90º. (Use the “Shim” (Part C) provided).
Insert the Burner.
Model Specifications
4.
5.
6.
1.
A x 8
B x 8
C x 8
3.
Min 300mm / 12in
2.
