Outdoor Fire Pit
Owner’s Manual
31" Portsmouth Fire Pit, Item # 60904
5
WARNING
FOR YOUR SAFETY:
Before using this outdoor fire pit, make sure you have read,
understand, and are following all of the WARNINGS as given on
Page 2 of this manual. Failure to follow all instructions
and WARNINGS can cause property damage, serious personal injury or death.
Operating Instructions
Lighting
1. Place a layer of dry kindling or a natural fire starter such as Fatwood™ onto the center of the log grate.
2. Place a layer of dry seasoned hardwood on top of the kindling. Make sure the hardwood is cut in
lengths no more than ¾ the diameter of the fire bowl.
3. Use a long match or stick lighter to light the kindling or firestarter.
4. Place the Spark Guard/Firescreen on the bowl by using the Fire Tool provided once the kindling or
firestarter is lit.
Tending
the
Fire
You may need to shift and/or add logs for the best fire.
REMINDERS
**Always wear protective gloves or use a pot holder when tending a fire.
**Wait until glowing coals have developed before adding any additional wood.
**Do NOT add gasoline, kerosene, diesel fuel, lighter fluid or alcohol to relight or enhance an existing
fire.
1. Carefully remove the Spark Guard/Firescreen by using the Fire Tool provided.
2. While using the long handled Fire Tool, shift coals and logs to allow additional airflow.
3. It additional wood is required, place wood on top of coals. Be careful not to shift ashes.
4. Replace Spark Guard/Firescreen by using the Fire Tool provided.
Extinguishing
the
Fire
1. Allow the fire to burn itself out.
2. Do NOT use water to extinguish a fire as this is dangerous and can cause damage to the outdoor fire
pit.
