Contact us for assistance: (866) 985-7877 | www.wtliving.com
5
ASSEMblY
1
Unscrew the 3
Medium bolts
that are pre-assembled
in to the
Post Mounts
to the
base
.
2
Use your Phillips head screwdriver to remove the
4 pre-assembled screws from
base
and
Waterbox
.
Remove
Waterbox
from
base
, and set aside.
3
Align the 2 holes from the
bracket
with the holes on
top of the
base
and insert
Small bolt
. Secure with
the
Small Washer and Small Nut
. Repeat with remaining 2
brackets. Hand tighten initially then tighten with the
Wrench
when all bolts have been inserted.
Hardware Used:
3x
Large Bolt, Bracket
6x Small Bolt, Small Washer, Small Nut
PREPARATION
Before beginning assembly of this appliance, make sure all parts are present. Compare all parts with package
contents list and hardware contents as listed on page 4 of this manual. If any part is missing or damaged,
do not attempt to assemble this product. Contact customer service for replacement parts.
ESTIMATED ASSEMblY TIME:
60 minutes
Tools Required for Assembly (NOT included):
• Adjustable opening wrench 8” long
• Phillips head screwdriver
• AAA Battery
Note: This heater has an Electronic Ignition and will require installation of 1 – AAA battery. The battery should be installed
by unscrewing the RED IGNITER BUTTON.
1
2
3
