8
A
Select the mounting location and mount the bracket
Wall mounting requires a bracket, which is sold separately (see page
28). The bracket is fastened on the wall using adhesive tape or screws.
Clean the surface well and dry it.
See the mounting instructions in the bracket package. Make sure that
the bracket is positioned correctly and that the angle is adjusted, so that
the Sensor faces towards the centre of the cooker.
Mount the Heat Sensor
Attach the mounting plate while
the Sensor is on it.
Remove the protective foil from
the mounting plate. Attach Heat
Sensor with the LED (A) facing
the user.
Remove the Sensor (one “beep”
may be heard). Press the
mounting plate firmly against the
bracket, so that the adhesive
tape is firmly attached.
2b
1
Mounting height on the wall above the cooker
Max 90 cm wide cooker.
Recommended: 80 cm
Alternatively: 65-79 cm
See the mounting instructions in the bracket package.
1 I N S T A L L A T I O N
2
1b
