General notes
•
All local regulations, including those referring to national and European standards need to be complied with when installing
this cookstove.
•
Check all parts are fitted correctly including firebricks and hotplate before lighting the cookstove.
•
On first lighting the stove may produce some fumes as the stove paint cures. Open windows as necessary to allow the fumes
to clear.
•
The door handles and controls will become hot during operation of the stove. Use the glove provided.
•
The chimney should not be shared with any other appliances.
•
Keep the firebox door closed except when access is required for lighting, refuelling and de-ashing.
•
The cookstove is not suitable for slow combustion or continuous burning.
•
Do not modify the cookstove
•
Use only replacement parts authorised by Razen Cookstoves.
Ventilation
•
Take care not to obstruct any air inlet grilles supplying combustion air for the stove.
•
An air extraction device shall not be used in the same room as the cookstove unless adequate additional ventilation is provided.
•
Other heating appliances requiring air for combustion shall not be used in the same room as the cookstove unless adequate
additional ventilation is provided.
Fuel
•
The stove is woodburning only. The maximum log length is 500mm. Ensure the wood is well seasoned. To season wood store it in
dry and well ventilated conditions for at least 12 months. Radial cracks in the ends of the timber indicate that the timber may
be ready to burn.
•
The stove is not an incinerator and should not be used to burn anything other than wood.
