10
CEILING MOUNTING WITH IR LENS
EXTENSION
P. 6-7
4
5
STARTING THE HEAT
SENSOR
Insert the battery and check step 5
before placing the Heat Sensor on
the installation plate.
Briefly press the button. The LED
should flash green.
SET SENSITIVITY LEVEL
Set the sensitivity level according to the mounting height (as described in
the table below) by evenly pressing the Sensor's button. The Heat Sensor's
sensitivity level must always be adjusted when installing it on the ceiling. Please
refer to the table below together with the information on page 16. Also
watch the video on sensitivity configuration below.
DISTANCE FROM COOKER TO HEAT SENSOR
SENSITIVITY LEVEL CONFIGURATION
Mounting height above
the cooker
0-90 cm wide cooker
Sensitivity
Number of "beep(s)"
160-200 cm
Recommended: Immediately above the middle of the
cooker.
Alternatively: Farther out into the room with
bracket. See the bracket package for mounting
instructions.
1 press
2 presses
Mounting height above
the cooker
0-90 cm wide cooker
140-159 cm
Recommended: Immediately above the middle of the
cooker.
Alternatively: Farther out into the room with
bracket. See the bracket package for mounting
instructions.
Please note: the sensitivity level of the Sensor is confirmed by the appropriate sound pattern sequence only (not LED flashes).
Watch the film:
https://youtu.be/oy-hrT7nTQM
Setting the sensitivity level
Watch the film:
https://youtu.be/SAeFdB3nP3s
Installation
