USER GUIDE
13
P. 6-7
P. 8-9
USER GUIDE
GETTING STARTED
The installation is completed when the function test has been passed.
The Heat Sensor will then give an alarm in a dangerous situation. The user manual,
accessories and stickers should be stored close to the Stove Guard for future reference.
After installation, the Heat Sensor
may start making short “beeps”
every five seconds while the stove is
being used (“pre-alarm”).
If there is not a dangerous situation,
press the button to indicate that the
situation is safe.
The Heat Sensor has then learned
more about your cooking habits
and you can continue cooking.
Please note:
When installing the Heat Sensor on the ceiling, the learning function will not be operational. The Heat Sensor
will automatically sound and switch the cooker off in the event of an increased heat condition.
The Heat Sensor learns and adjusts, when the user resets the pre-alarm. See FAQ page 19, point 14.
In order to reset the system, turn all controls off. The Stove Guard will automatically reset itself after the heat
condition has cleared and the cooker has cooled down.
2
