16
CHANGE THE SENSITIVITY LEVEL
OTHER SETTINGS
Due to differences in kitchen environments, the sensitivity level of the
Heat Sensor may have to be adjusted manually
.
1. Remove the Sensor from the installation plate
The Heat Sensor emits 4 “beeps” ( ). The cooker is turned off.
2. Adjust the sensitivity level
See pages 6-10 for sensivitity levels to be applied.
Place the Heat Sensor on the table (as shown in the picture). Press and hold in the button until 2 “beeps” ( ) are
heard. Release the button. The correct sensitivity can now be input.
Note!
When selecting the correct sensitivity level it is important the process is not rushed. Ensure the sensor button
is pressed down firmly each time, holding for 1 second before releasing.
Be sure to pause for 1 second between each press.
3. Confirmation of setting
After 5-15 seconds, the Heat Sensor will confirm the sensitivity setting with the same number of “beeps”.
In case of error, start from step 2 again. Please note that the sensitivity level is confirmed by the appropriate number of
"beeps" only and not LED flashes.
4. Activate the Sensor
Return the Heat Sensor correctly onto the installation plate. Press the button once.
Watch the film:
https://youtu.be/oy-hrT7nTQM
Setting the sensitivity level
“BEEP” .... “BEEP”
