EQUIPMENT:
FIRE
CLASS
PRECEPT EN13
PUBLICATION:
FIRECLASS PREC EN13 INST
ISSUE No. & DATE:
2 22/07/2021
PAGE 25 of 32
Pressing ENABLE (+) or DISABLE (-) toggles
setting between
D/N ON
and
D/N OFF
.
•
To set current time
Press SELECT ↓, to access current Time Set
display:
HH:MM:SS
Time Set
HH flashing
Press ENABLE (+) or DISABLE (-) to change
HH to desired value (00 to 23)
Press SELECT ↓, Time Set
display:
HH:MM:SS
Time Set
MM flashing
Press ENABLE (+) or DISABLE (-) to change
MM to desired value (00 to 59)
Press SELECT ↓, Time Set
display:
HH:MM:SS
Time Set
SS flashing
Press ENABLE (+) or DISABLE (-) to reset the
SS value to zero.
•
To set Day/Night Mode On Time
Press SELECT ↓, to access day/night mode ON
Time Set display:
HH:MM:SS
ON Time
HH flashing
Press ENABLE (+) or DISABLE (-) to change
HH to desired value (00 to 23)
Press SELECT ↓, ON Time Set
display:
HH:MM:SS
ON Time
MM flashing
Press ENABLE (+) or DISABLE (-) to change
MM to desired value (00 to 59)
Press SELECT ↓, ON Time Set
display:
HH:MM:SS
ON Time
SS flashing
Press ENABLE (+) or DISABLE (-) to change SS
to desired value (00 to 59)
•
To set Day/Night Mode Off Time
Press SELECT ↓, to access day/night OFF Time
Set display:
HH:MM:SS
OFF Time
HH flashing
Press ENABLE (+) or DISABLE (-) to change
HH to desired value (00 to 23)
Press SELECT ↓, OFF Time Set
display:
HH:MM:SS
OFF Time
MM flashing
Press ENABLE (+) or DISABLE (-) to change
MM to desired value (00 to 59)
Press SELECT ↓, OFF Time Set
display:
HH:MM:SS
OFF Time
SS flashing
Press ENABLE (+) or DISABLE (-) to change SS
to desired value (00 to 59)
Press SELECT ↓, to exit back to Delay On/Off
Set display:
D/N ON
Change?
or
D/N OFF
Change?
Pressing SELECT ↓ repeats the cursor/display
changes as above.
Pressing SELECT ↑ repeats the
cursor/display
changes as above in reverse.
•
To exit Clock Module menu:
Return WP DIL switch on TIMER MODULE to
OFF position.
Press SELECT ON/OFF: Module switches off
the LCD Backlight and exits configuration mode,
Normal Time display:
HH:MM:SS
D/N ON
or
HH:MM:SS
D/N OFF
On completion of editing, return the Access
Control Keyswitch to position 0.
