background image

WARRANTY 

 

Two-Year Limited Warranty to the Original Purchaser 

 

Sonetics Corporation warrants to the original purchaser of its products, that they 
will be free from defects in materials and workmanship, under normal and proper 
use, for the period of two years from date of purchase. Sonetics Corporation will 
repair or replace, at its option, any parts showing factory defects during this 
warranty period, subject to the following provisions. This warranty applies only to 
a new product which has been sold through authorized channels of distribution. 
All work under warranty must be performed by Sonetics Corporation. All returned 
products must be shipped to our address, freight prepaid, accompanied by a 
dated proof of purchase. The purchaser voids this warranty if he, she, or others 
attempt to repair, service, or alter the product in any way. This warranty does not 
apply in the event of accident, abuse, improper installation, unauthorized repair, 
tampering, modification, fire, flood, collision, or other damage from external 
sources, including damage which is caused by user replaceable parts (leaking 
batteries, etc.). This warranty does not extend to any other equipment or 
apparatus to which this product may be attached or connected. The foregoing is 
your sole remedy for failure in service or defects. Sonetics Corporation shall not 
be liable under this or any implied warranty for incidental or consequential 
damages, nor for any installation or removal costs or other service fees. This 
warranty is in lieu of all other warranties, express or implied, including the 
warranty of merchantability or fitness of use, which are hereby excluded. To the 
extent that this exclusion is not legally enforceable, the duration of such implied 
warranties shall be limited to two years from date of purchase. No suit for breach 
of express or implied warranty may be brought after two years from date of 
purchase.

 

Summary of Contents for BP5-10









Reviews: