12
OPERATION
Meter Layout, see
Figure 1
1.
LCD:
displays the measuring value and unit.
2.
Function keys
:
2-1. SELECT key: DC /AC mode, temperature C/F, Diode /
Continuity performance switch.
2-2. RANGE key: select auto range or manual range mode. Auto
range is the normal mode, it will display AUTO symbol. Press it to
change to manual range. Press it more than 2 seconds, it will return
to auto range mode.
2-3. HOLD key: press it, the presently measured value is held on
LCD and HOLD symbol displays. Press it again, HOLD symbol
disappears, and the meter exits the holding mode.
2-4. REL key: press it, reading clears and goes to relative value
measurement mode. REL symbol displays, press it again, REL
symbol disappears, and the meter exits the relative mode.
2-5. MAX/MIN key: press it, meter goes to MAX mode, it will
hold the max value of measured reading. Press it again, goes to
MIN mode, it will hold the minimum value of measurement. No
