19
5. Place the test leads in parallel with the capacitor being tested. The red
test lead is for the positive pole. LCD displays capacitance value.
Note:
Never input voltage or current to the VΩHz terminal when measuring
capacitance.
In order to assure an accurate reading, press the REL button to clear the
reading before testing.
There is only the auto range mode for testing capacitors.
The capacitance must be complete discharged before testing to protect
the meter.
A reading over the 400uF range will delay 15 seconds.
Frequency Measurements
1. Insert the black lest lead into the COM terminal and the red one into
the V/Ω/Hz terminal.
2. Turn the selector knob to the Hz range.
3. Place the test leads to the signal source or the load which is to be
tested.
4. Press the Hz/DUTY key to switch frequency/duty cycle; it will
display the frequency or duty cycle of the signal source which is tested.
Note:
There is only the auto range mode under the frequency mode.
