26
APPENDIX A
OPERATING INSTRUCTIONS FOR 88CP9 AMP KLAMP
Thank you for purchasing the 88CP9, a smaller sized, convenient to use
AC Current Clamp-On Adapter for the Victor 88E Multimeter. The
88CP9 is a 200Amp AC Clamp-on Adapter using the voltage output of
the adapter and the standard meter inputs of a multimeter. It can also be
used with power harmonics, oscilloscopes, or other voltage
measurement devices.
Using the Amp Klamp Safely
Warning
To prevent electric shock, fire and personal injury, carefully read all
safety information before attempting to operate the current Clamp and
follow these procedures.
Do not use the clamp on circuits rated higher than 600V in Installation
Category II. Use caution when clamping around un-insulated
conductors or bus bars. Do not use a Klamp that is cracked, damaged, or
has a defective cable. Such Klamps should be made inoperative by
taping the Klamp shut to prevent operation and disposed of. Check the
magnetic mating surfaces of the Klamp jaws; these should be free of
dust, dirt, rust, and other foreign matter. Keep your fingers off the
