T
OTAL
P
AC
®
3
Page 5 of 8
Integrated Fire Protection System
G
Dimensional Data & Cabinet - Deluge System
FM-076A-0-108A
2- Skid mounted TotalPac
®
3 unit
The
TotalPac
®
3
unit skid base is made of sturdy 11 gauge
and 7 gauge steel. Skid base is available in three (3) sizes:
23" x 25" x 6" (584mm x 640mm x 152mm) for 1½"
(40mm) or 2" (50mm) system
35¾" x 25" x 6" (908mm x 640mm x 152mm) for 3"
(80mm) or 4" (100mm) system
46" x 25" x 6" (1170mm x 640mm x 152mm) for 6"
(150mm) system
All surfaces are rust proof coated, inside and outside, with
fire red, oven baked polyester powder on phosphate base.
Multiple units installation is easily achieved by jointing
manifold sections together at their water inlets. Drains outlet
shall remain separate and open for each unit. Refer to
figure 11
OPEN DRAIN DETAILS FOR MULTIPLE UNITS
.
IMPORTANT ! TotalPac
®
3
unit is NOT designed to be
installed where it will be subjected to outdoors and/or
freezing conditions. Refer to paragraph 3
ENVIRONMENT
in
section
A
GENERAL DESCRIPTION
for additional details.
Subjecting the unit to conditions outside these limitations
might hamper the normal operation of the system.
Table 1 - System weight on skid
System size
Weight
1½" (40mm)
465 lb (211 kg)
2" (50mm)
481 lb (218 kg)
3" (80mm)
628 lb (285 kg)
4" (100mm)
700 lb (318 kg)
6" (150mm)
955 lb (433 kg)
