Operation
Connect the power cable to a 13 amp supply that is located in a safe, dry area.
●
The switch on the heater head is used to control the one heat setting. (I) for
900w,
(
II
)
for 1200W, (I&II) for 2100W.
The 0 position is off.
Although the patio heater is shower proof, do not use when raining or in wet
conditions.
Always disconnect the power cable from the electrical supply, when the patio
heater is not in use.
Technical specification
Voltage Rating
220-240V, 50Hz
Power Consumption
900W/1200W/2100W
Unit Size
58.5cm (W)×46cm(D)×208cm(H)
Unit Weight
15.4kg
MAINTENANCE
Unplug the unit and let it cool completely.
To keep the heater clean, the outer shell may be cleaned with a soft, damp
cloth. You may use a mild detergent if necessary. After cleaning, dry the unit
with a soft cloth.
DO NOT use alcohol, gasoline, abrasive powders, furniture polish, or rough
brushes to clean the heater. This may cause damage or deterioration to the
surface of the heater.
Although this heater is outdoor approved, DO NOT immerse the heater in
water for your safety.
Wait until the unit is completely dry before use.
STORAGE
If the heater will not be used for a long period of time, store it in a cool, dry
location when not in use. To prevent dust and dirt build-up, use the original
packaging to repack the unit.
TROUBLE SHOOTING
If the heater will not operate, please check the following before seeking repair of
service:
Check if the power cord is plugged into an electrical outlet, if not plug in.
Check if electricity to the main fuse is working.
Make certain the power switches are turned on. If not, choose a setting.
WEEE
This product contains recyclable materials. Do not dispose this product
as unsorted municipal waste. Please contact your local municipality for
the nearest collection point.
For more information please contact your supplier:
Primrose
info@primrose.co.uk
Tel: 0118 9035210 (UK)
Tel: 0044 118 9035210 (outside of UK)