with four M4 nut X 12.
Step 5: Feed the power cord plug through the top tube and
middle tube, push the heater head onto top tube and
secure using M4*8 screws.
Step 6: Raise or retract the top tube to the desired height and
tighten to the middle tube by screwing the knob down.
Step 7: Secure the power cord to the weighted base.
Attach the power cord on the stainless steel base
Step 8: Press the button to adjust heater head to desired angle.
Summary of Contents for OL2370
Page 1: ...heaters Model OL2370 2 08 one...
Page 2: ......
