Assembling
1) Fix the wall bracket use the 2 PCS screws M3*6mm.
2) Fix the heater on the pole by using the provided one piece of M6*10mm
Screw and fix tightly.
1.
Mount the heater outside or in a large open area and well away from
any obstructions such as branches or where the heater is near any
objects that can be affected by heat, such as furniture, curtains or
other inflammable objects (minimum distance 1 meter).
2.
Do not use near bath tubs, wash areas or swimming pools.
3.
Do not use in unventilated areas
4.
Do not use where gas, petrol, paint or other inflammable goods are
stored.
5.
Do not push any items through, obstruct or cover the grill of the
heater head.
6.
Do not position immediately above or below an electrical socket.
7.
Do not move when connected to an electrical supply and always wait
for the patio heater to cool down before storing away.
8.
Do not touch the heater head when in use.
9.
Do not leave turned on and unattended especially when children and
or animals are in the vicinity.
10.
The indication of the different positions of switches shall be visible
from a distance of 1M.
11.
The Marking concerning covering shall be visible after the heater
has been installed. It shall not be placed on the back of heaters.
12.
The unit must be placed with the clearance of 180cm to the floor
and 30cm to the ceiling.
13.
The unit must be correctly installed according to the instructions.
Make sure the head is at least 1.8m from the floor.
14.
The unit must be securely placed on a vertical and flat wall.
15.
The unit is at high temperature during operation. It keeps hot for a
period after shut down. Potential danger would occur when touching
it during this period.
16.
Don’t place the unit closed to curtain and/or other flammable objects.
Otherwise there will be a danger of catching fire.
17.
Don’t cover the unit with anything during operation or a short time
after it’s shut down.
