18.
Don’t wrap the power supply cord on the unit.
19.
The unit must be handled with care, and avoid vibration or hitting.
20.
The unit must be securely grounded during operation.
21.
If the unit gets damaged, it must be repaired by professional
electricians.
22.
When the power supply cord is damaged, it must be replaced by
authorized agent or other professional people to avoid danger.
23.
The unit must not be positioned under a socket.
24.
When assembling, keep clear from any board or flammable material.
25.
The unit must be supervised by adults if it’s used by a child.
26.
It is not safe to install the unit by a swimming pool, in a bathroom or
shower area.
27.
It is not safe to use on a building site, greenhouse, barn or stable
where there’s flammable dust.
28.
The head of the unit is at high temperature during operation. Unplug
the unit and wait till it cools before cleaning.
29.
Don’t use this unit in place where causticity or volatile air exists, i.e.
dust, steam, gas, etc.
30.
Don’t use this unit as a cloth drier or towel drier.
31.
Don’t use this unit as a sauna heater.
32.
Don’t use this unit as a room heater.
33.
Don’t use this unit in place of animal propagating and rising.
34.
Don’t immerse this unit into water for cleaning.
35.
The unit should be plugged in a socket, which is easily visible and
reachable.
36.
Two Dark points may exist on the surface of the heating elements
during the first few minutes after it is turned on. This is normal, and
will not affect the performance of the unit.
37.
This appliance is not intended for use by persons (including children)
with reduced physical. Sensory or mental capabilities, or lack of
experience and knowledge, unless they have been given supervision
or instruction concerning use of the appliance by a person
responsible for their safety.
38.
Children should be supervised to ensure that they do not play with
the appliance.
Operation
Connect the power cable to a 230V, 13 amp supply that is located in a safe,
dry area.
•
The
Pull-Off Switch
is used to control the power of the appliance.
•
Once the power is on, the
Pressing Switch
on the heater is used to
control the heat and light setting. (I) for heat setting 1500W, (II) for
