Page 8
Pyxis User Manual V3.2 with accessories
2 GETTInG STArTEd
2.1 Storage, Lifting & Positioning
2.1.1
Storage
1.
Pyxis is designed to be used and stored outside. However, to prevent
unnecessary weathering it is recommended that the unit is stored
inside when possible.
2.
It is recommended that the battery bank is charged regularly while
in storage. Refer to
“3.2 Charging Methods” on page 13
for further
information.
3.
The main isolator and output protection switches should be switched
off when in storage and not being charged to prevent unnecessary
discharge of the battery bank.
2.1.2
Lifting
Pyxis is designed to be easily liftable without the need for lifting gear or
machinery.
It is recommended that either Pyxis or the Battery Extender are lifted from the
in-built handles by two persons.
2.1.3
Positioning
1.
The unit must be positioned upright on a flat, solid surface. Ensure that
the unit is not at risk from being submersed in water.
2.
Position the unit out of direct sunlight where possible.
.
2.2 Before Using For The First Time
The unit’s internal battery should be charged before the unit is used for the first
time. Follow instructions in
“3.2 Charging Methods” on page 13
The unit must remain upright at all times.
The unit may only be installed in accordance with the
requirements of IEC 60364-4-42
