Round Flat Disc
REV. 1-7-19 Page 19
7/8” Washer
Brass Nut
OASNG#
(Burner Orifice)
U3-8D-S
(Fitting)
48-86 Fitting
T200-9898-46
(Flex Connector)
Note: Use joint compound or
Teflon tape resistant to all
gasses on all male NPT
threads; not flared fitting side.
Ensure all connections are
tight and check for gas leaks
before and after assembly is
complete.
REV.1-4-19
(½” Flare to 3/8” Male Thread
Fitting Not Supplied)
U1-8C-S
(Fitting)
Knob
Mounting Nut
Inlet Gas
Supply
Thermocouple
PIEZO48WH
PIEZO23WH
Ignition Module
Ground
Expanded View of Thermocouple
Manual Safety (TMSI) Fire Pit
Ignition Hood
Spur Burner