background image

The ES18B is also identified as FK1 and is referred to FK1 in this document.

 

5

 

 

 

 

 

STEP 6: 

System will verify that code has been saved

 

 

 

 

The new code is now enrolled and available to be used to 

open the lock.

 

If the code entered twice is not the same, the LCD will 

display “Code Mismatch” and return to the “New Code” 

interface after two seconds to re-register the user.

 

If the registered user password has been registered 

before, the LCD will display “Code is Similar” and return to 

the “New Code” interface after two seconds to re-register 

the user.

 

 

2.6

 

Delete One User

 

STEP 1: 

Enter a valid code

 

STEP 2: 

Using the 

 

or 

 

scroll to the “Delete One User” 

and Press “Menu/OK.”

 

 

 

STEP 3: 

Press “Menu/OK.”

 

STEP 4: 

The system will ask which User Code is to 

be deleted, Press 

 

or 

 

until the desired USER ID 

is reached.

 

 

 

 

STEP 5: 

Press “Menu/OK.” This User Code is now deleted 

from the system.

 

 

2.7

 

Disable User Code

 

This feature would be used in order to disable a user code  

as opposed to deleting it. Disable/Enable user codes options 

may be when a user’s access rights are temporarily revoked 

(i.e. the user may be on vacation or otherwise away from

 

the business). After the code has been disabled, it can be 

re-enabled at a later time, following the same process by 

selecting “Enable User.”

 

STEP 1: 

Enter a valid code.

 

STEP 2: 

Scroll 

▲ 

or 

▼ 

to the menu selection 

“Disable User” and Press “Menu/OK.”

 

 

 

STEP 3: 

The system will ask which User to disable. 

Scroll 

 

or 

 

to the desired USER ID and Press OK.

 

 

STEP 4: 

The system will verify the User has been disabled.

 

 

2.8

 

Enable User Code

 

STEP 1: 

Enter a valid code.

 

STEP 2: 

Scroll 

▲ 

or 

▼ 

to the menu selection 

“Enable User” and Press “Menu/OK.”

 

 

 

STEP 3: 

The system will ask which User to enable. 

Scroll 

▲ 

or 

▼ 

to the desired USER ID and Press 

“Menu/OK.” 

 

STEP 4: 

The system will verify the User has been 

enabled

Summary of Contents for ES18B










Reviews: