8
LT6498 (ISS 2)
SECTION THREE Cleaning (Users Instructions)
Warning: -
Before you clean any part of the appliance ensures that the appliance is turned off and cold.
Cleaning: Black Painted Surfaces
These surfaces should be dusted regularly and any marks removed with a soft cloth.
Abrasive or chemical cleaner should never be used.
Cleaning: Pilot Assembly
(Before cleaning ensure that the appliance is turned off and cold)
In some instances you may experience ignition problems even when the
appliance is new. This may be due to the aeration hole in the pilot body (see
photograph) being partial blocked with dust, pet hairs, or other foreign
matter. The source of this debris could be such things as carpet fibres,
decorating dust or pet hairs etc.
To gain access to the pilot remove the Gas Control Knob by loosening the two
retaining screws, remove the Allen Screw on the Door handle and open the
door. The Log Fuel Bed will need to be removed for access around the pilot.
The pilot is located on the left hand side of the appliance, any debris in or
around the aeration hole can usually be removed using the nozzle of a
vacuum cleaner around the top of the pilot assembly, this usually draws it out of the aeration hole. It is advisable not
to blow the debris into the hole or pilot assembly as this may cause more of a restriction and not rectify the problem.
Note: - Take care when cleaning in this area so as not to damage the pilot assembly.
Glass Cleaning
From time to time it will be necessary to clean the glass panel of your Fireline FXW/FPW Gas Stove. We recommend
you use a Ceramic hob cleaner these are available for all leading super markets: - i.e. ASDA, TESCO, SAINSBURY’S Etc.
Brands of hob cleaning we have tested and found suitable are - HOB BRITE & VITRO CLEN.
Ensure the fire as been turned OFF for at least four hours to ensure it is cool.
Remove the Gas Control Knob by loosening the two retaining screws and slide off the valve spindle, remove
the screws holding the door closed and open the door.
The door can either be cleaned while attached to the stove or taken off by removing the two door hinge pins
and lifting the door upwards taking care as the door is made from cast iron and is heavy.
Lay some old newspaper under the area you are working on when the door is open.
Follow the instructions on the Hob Cleaner Bottle.
On stubborn stains (where the appliance as been used for a long period without glass panel being cleaned),
use a new Brillo Pad well wetted with the Hob cleaner applied directly to it.
Ensure all the residues of the cleaner are removed with a damp cloth and the glass panel is completely dry
before closing/rehanging the door and refastening the door to the stove.
Important: - The appliance must not be used if the glass panel is missing or damaged.
Note: - The glass may discolour quickly when first installed, and it should be cleaned. This is due to the burning off
process of the refractory shapes.
Summary of Contents for FPW
Page 28: ...28 LT6498 ISS 2 ...
