Fire Control Panel - Model 08451
SYSTEM ISOLATION
Rev 1.0
Page | 1
1
Introduction
1.1
General Information
All FirePro Fire Extinguishing Aerosol Generators use the latest generation FPC solid compound.
Upon activation, the solid compound is transformed into a rapidly expanding, highly efficient
gas, based on Potassium salts. It does not deplete oxygen levels. The FirePro Aerosol
Generators have a certified life of 15 years, with minimal maintenance required.
Ozone Depletion Potential (O.D.P.) = 0
Atmospheric Life Time (A.L.T.) = 0
Global Warming Potential (G.W.P.) = 0
Non-corrosive & Non-toxic
1.2
Self Activation Temperature
FirePro Condensed Aerosols have a built-in fail-safe activation system ensures operation of the
generators when required, even if everything else fails.
When the temperature of the Aerosol units reaches 300°C the unit will activate
DO NOT Carry out any welding or grinding work in the vicinity of the aerosol units.
1.3
Handling and Storage - when handling the Condensed Aerosol Generators do not:
•
Disassemble the unit
•
Carry out any welding or grinding work in the
vicinity of the fire extinguishing system
components.
•
Exert force or impact which creates
physical or mechanical damage to the
casing.
STORAGE and OPERATIONAL CONDITIONS
•
Temperature:
–
54 and +54°C
•
Humidity: maximum 98% RH
•
Service life: 15 years (date of manufacture appears on each generator)
