Fire Control Panel - Model 08451
SYSTEM ISOLATION
Rev 1.0
Page | 3
3
Isolation by Unplugging the FirePro Units
All FirePro Aerosol Generators are fitted with a Deutsch Plug. Unplugging the unit it will
remove it from the System.
Ensure that all units are unplugged in the system as remaining units may be operational.
3.1
Fault Indicators
If a FirePro unit is unplugged a fault will indicate on the control panel.
Normal Condition
Fault Indicator
Fault + Isolation
To silence the internal sounder and any installed siren/strobes that have operated due to an
alarm condition, press and hold a Single Button until a 1 beep
and the “Isolated” LED is
illuminated.
3.2
Restore the System
Plug the units back into the system and restore the control panel to normal operation, press a
Single Button
and ensure the “Isolated” LED turns off
.
