FirePro
®
Technical Manual
Keep this Technical Manual for future use. This
manual lapses when revised. The latest version
is obtainable from FirePro Systems Ltd.
Version 1, 01-07-2010
FirePro
®
products are manufactured by FirePro Systems Ltd
Page 5 of 6
9
Warnings and Limitations
Please Note
The FPC-1 module contains various elements, including a control module, and a
heat detection sensor that are intended to activate a compatible extinguishing
unit by triggering a pre-defined electric igniter.
When used with an extinguishing device, proper planning of the system's configuration
and all its components including infrastructure, and installation according to the
manufacturer's instructions and applicable standards is an imperative and reliant
prerequisite and condition precedent for the system's proper and effective operation.
The designer and installer should posses the appropriate skills for said implementation
and any loss or damage caused due to improper planning or installation will befall solely
upon the planner and/or installer.
The responsibility for any improper action performed that results in loss or damage will
befall solely upon the planner and/or installer.
The manufacture bears no responsibility for fire and/or fire outset in locations where fire
detection systems are installed and/or damages direct or indirect caused to any person
and/or property or third parties as a result of use of this product or resulting from any
malefaction thereof.
Note
Do not install, commission, or maintain the system prior to reading this manual
in full.
Summary of Contents for FPC-1
Page 1: ......
