Sigma_XT_signs_m3.5.docx
Page 14 of 14
8.
Troubleshooting
Output Unit refers to a SIGN, this fault will be
•
Address is the same as another device in the 485 circuit
•
Power has failed to the sign.
•
RS485 signal has failed to the sign.
Status Unit refers to an LCS, this fault will be
•
Address is the same as another device in the 485 circuit
•
Power has failed to the LCS.
•
RS485 signal has failed to the LCS.
9.
Specifications
Internal Sign
External Sign
Local Control Station
Size
195 x 300 x 50mm
195 x 300 x 50mm
135 x 186 x 50mm
Material
1.2mm steel Epoxy coat
Thermoplastic
1.2mm steel Epoxy coat
IP Rating
IP 40
IP 55
IP 40
Op. Voltage
15V to 30V DC
15V to 30V DC
21 to 30v DC
Current
–
Quiesant
20 mA
20 mA
60 mA
Current
–
Alarm State
140 mA
140 mA
70 mA
OUTPUT UNIT X →
FAULT
STATUS UNIT X →
FAULT
