Contact us for assistance: (866) 985-7877 | www.wtliving.com
l
ASSEMBLY
7
ñ
Attach
Head Assembly
C
to
Upper Post
F
. Route
Gas Hose
E
down into
Upper/Lower Posts
F
/
G
and
align 4 small holes on the
Head Assembly
C
with 4 Small
holes in the
Upper Post
F
.
[HINT: Control knob should be
above decal on post.]
Insert the 4
Small Bolts
with Lock
Washers
O
through the aligned 4 holes and tighten securely
with the
Wrench
W
.
Hardware Used:
4 x Small Bolt w/Lock Washer
O
8
ñ
¸Á>¿,gÛgUÁµ¦¿
NOTE: MAKE SURE TO REMOVE THE
BLUE REFLECTOR TAPE ON REFLECTOR PIECES PRIOR TO
ASSEMBLY!
¸¸gLÓ¿/¡[¿t¿gUg¸¸>µÓ¿tµ¿¡µ¡gµ¿>ygÁ¿t¿µgÛgUÁµ¿
¸gUÁ¸\¿¸g¿g>U¿¸UµgÑ¿¡µµ¿Á¿tɵÁgµ¿>¸¸gLÓ¿>_¿
retighten after sections are aligned.
Slide two
,g×gU¿³½*>g¶
A
together. Insert one
Small Screw
.
Screw on
Cap Nut
loosely.
Repeat with the other
,g×gU¿³½*>g¶
A
.
Slide
,g×gU¿³½g¿g³½> ½
B
onto assembled
,g×gU¿³½
Panels
A
. Insert one
Small Screw
Q
and screw on
Cap Nut
U
loosely. Repeat with two more
Small Screws
and
Cap Nuts
Á¿U¡gÁg¿µgÛgUÁµ¿>¸¸gLÓ¦¿ÉÓ¿ÁyÁg¿>¿¸UµgѸ¿>_¿
cap nuts.
Hardware Used:
12x Small Screw
Q
| 12x Cap Nut
U