Instruction manual for installation and maintenance
Electric Tilting Cooker
CBRE40
GB-CBRE40-DU-00 Page
6 di 10
COOKING CYCLE
This appliance is equipped with an electronic keypad device featuring a three digit
display and LED to perform and follow all the cooking operations, (see fig.
“Keypad”
).
Here is a list of the procedures for a safe and correct use of the appliance.
Warning! Verify the vessel that has to be in horizontal position:
The led of the key
light up.
1.
Give tension to the equipment:
Connect the appliance by turning on the main switch of the net system; the LED of
the control board near the key (5) will lights up
.
2.
Switch on the equipment:
Press the key
. The complete keyboard lights on.
3.
Setting required temperature:
−
To heat with the required temperature press the key
, the corresponding led
lights up.
−
With keys
select the required temperature value (range 20÷300°C).
−
To confirm the value press again the key
or wait 4 sec. till when the led of
this key switch off.
Warning! :
The set value remain in the keypad memory also switching off
the equipment.
4. Setting cooking time:
−
To set the cooking time press the key
, the corresponding led lights up (for
around 4 sec.)
:
−
Whit the led lighting, with keys
select the value of required time (range
INF.
0÷9h:59 min
.) appearing on the display.
−
The value INF excludes the cooking time (the end of cooking needs a manual).
−
To confirm the value press again the key
,or wait 4 sec. till when the led
switchs off.
Warning!: The last set cooking time remains in the keypad memory.
Warning!: The countdown of set time starts starting the cooking cycle, key
.
