Fireye InSight 4 Series Manual Download

Page: 9 / 59

SPECIFICATIONS

MECHANICAL:
Housing Material:

Standard Models and CEX: Cast aluminum with gray polyester powder coat finish
Ingress Protection IP66 with 0.4 joule impact rating

Housing Weight:

Standard Models: 5.0 lbs. (2.3kg); CEX Model: 6.3 lbs. (2.9kg)

Mounting:

Requires one threaded mounting flange, ordered separately (see below).
For fiber optic mount, refer to bulletin CU-117. In the specific case of installation on InSight
I fiber optics already in place refer to bulletin 133-754 and use Adapter Kit 129-193.

Cooling / Purge Air Requirements

Source:

Clean, dry, cool

Volume:

4 SCFM (113 l/min) at 3/8” threaded mounting  flange, or 1 inch “Y” fitting,
mounted on scanner sight pipe. Temperature  near the upper limit of the scanner
operating  range and/or use with dirty/dusty  fuels may require up to 15 SCFM (425
l/min).

Pressure:

Adequate to overcome furnace or windbox pressure

Operating Temperature Rating:

-40°F to +150°F (-40°C to +65°C) ambient; -40°F to 176°F (-40°C to 80°C),

scanner internal temperature.

Storage Temperature Rating:

-40°F to + 185°F Ta (-40°C to +85°C Ta)

Humidity:

0% to 95% relative humidity, non-condensing

STANDARD MOUNTING FLANGE:

Material:

Cast aluminum with gray polyester powder coat finish. Contains an

integral

heat-insulating female thread insert

Flange Threads:

P/N 60-2919-1 1" NPT female pipe mount with 3/8” NPT female cooling air connection.
P/N 60-2919-2 1" BSP female pipe mount with 3/8” BSP female cooling air connection.

OPTIONAL MOUNTING FLANGE, CAST ALUMINUM:

Material:

Cast aluminum (without heat-insulating thread insert), with grey polyester powder coat

finish

Flange Threads:

P/N 60-2692, 1" NPT female pipe mount with 3/8" NPT female cooling air connection.
P/N 60-2693, 1" BSP female pipe mount with 3/8" BSP female cooling air connection.

ELECTRICAL:

Input Power:

24 Vdc, +10%, -15% supply current: 0.25A, 6VA, Hold Time must be 20 msec
Min. Fireye power supply 60-2685 is recommended

Electrical Connection:

12-pin screw type quick-disconnect

Relay Output:

FLAME RELAY, - 1 : SPST (N.O.) / -2:SPDT (Form-C)

FAULT RELAY, SPST (N.C.)

Contact Rating:

Minimum: 10 mA @ 5 Vdc (All models)
Maximum: 2 A @ 30 Vdc; 2A @ 50 Vac (Series 4E-1WINC models only)
Maximum 2A @ 30 Vdc; 2A @ 230 VAC (All other models)

Analog Output:

4-20 mA dc current, referenced to 24Vdc common, Max. connected 1oad: 750 ohms

Operator Interface:

Alpha -Numeric Display with five pushbutton keys.

Cable Specification:

P/N 59-547 (12-conductor):

Multi-core,  12 conductor  (color coded), 18- AWG, with foil wrap and overall braided shield
and drain wire. PLTC-ER  rating. Maximum  cable length 1000 feet (305 meters) Cable
Jacket: PVC / black (flame-retardant,  RoHS compliant)
Temperature  Rating: -40°F to +221°F (-40°C to +105°C)

Nominal O.D. 0.52" (13.2 mm), maximum O.D. 0.56” (14.2mm)

P/N 59-497 (12 Conductor)
Multi-core, 12 conductor (color coded), with foil wrap and overall braided shield Six #18
AWG and four #22 AWG conductors, plus one #22 AWG twisted pair Cable Jacket:
Irradiated Modified Polyolefin (flame-retardant, low smoke, zero halogen) Maximum