USING ELECTRIC POWER
Be
sure to ground the generator if the connected electrical equipment is grounded.
NOTE:
(a) Check the digital display for proper voltage.
(b) Turn off the switch(es) of the electrical appliance(s) before connecting to the generator.
(c)Insert the plug(s) of the electrical appliance(s) into the receptacle.
(d) Check the amperage of the socket, and be sure not to take a current exceed the exceed the
specified amperage.
This generator is thoroughly tested and adjusted in the factory.
If the generator does not produce the specified voltage, consult your nearest FIRMAN
Generator dealer.
Be sure that the total wattage of all appliances does not exceed the rated output of the
generator.
When the circuit breaker or no-fuse breaker turns off during operation, the generator is
overloaded or the appliance is defective.
Stop the generator immediately, check the appliance and /or generator for overloading
or defect and repair as necessary.
(e) Make sure the AC CIRCUIT BREAKER is
"ON". If the breaker is "OFF", set the
breaker “ON”.
Page 19
