10
NOTICE
1. When the Portable Power Station is turned on for the first time, all icons on the LCD screen will
be illuminated for 3s. After the first boot, if there is no output and no error detected, the LCD enters
standby mode.
2. While charging, the Portable Power Station LCD (E) displays INPUT WATTS, and alternates
between SoC% and HRS TO FULL.
4. While discharging, the Portable Power Station LCD (E) displays OUTPUT WATTS,
and alternates between SoC% and HRS TO EMPTY.
5. When the Portable Power Station is ON, pressing Battery power display button (6) repeatedly,
the LCD displays the battery level information of the Main Portable Power Station, Power Pack
No. 1, Power Pack No. 2, until the last connected battery pack. If no operation is performed within
10 seconds after the button is pressed, the screen switches to the system interface .
6. When a fault is detected, the corresponding two-digit fault code will be displayed in the MDA,
and the power indicator will light in red. In particular, when a HIGH temperature fault or a LOW
temperature fault is detected, "H I" and "L0" will be displayed in the MDA respectively which
literally indicates the first two characters of "HIGH" and "LOW".
FEATURES
English Customer Service: 1-844-FIRMAN1
