The
wheel
kit
is
not
intended
for
over
-
the
-
road
use
.
Install the Support Leg
Install the Handle
1. Place the handle
K
over the mounting channel
on the frame.
2. Secure the handle to the frame using the two
handle flange bolts
H
(M8x45).
3. Place a flange nut
F
(M8) on the end of each
bolt and fasten securely with provided
wrenches.
DO NOT
over tighten the flange nuts.
A
B
C
F
ASSEMBLY
The generator requires some assembly prior to
usage.
Install
the
Wheel
Kit
F
E
G
H
K
1. Before adding wheels, tip the generator on
its side.
2. Slide the axle pin
A
through the wheel
B
.
3. Slide the axle pin
A
through the mount point
on the frame and flat washer
D
.
4. Secure the wheel and axle pin with the cotter
pin
C
.
5. Repeat steps 2-4 to attach another wheel.
1. Attach the support leg
G
to the generator
frame with flange bolts
E
(M8x16) and flange
lock nuts
F
(M8).
2. Tip the generator slowly so that it rests
on the wheels and support leg.
3.Tighten bolt
E
and nut
F
with provide
wrenches.
CAUTION
D
