First Alert 2190DF Operations & Installation Manual Download

Page: 5 / 8

Home and Office Security Safes

Step 2. Programming a Passcode

Use the digital keypad to program your own 3 to 8 digit
passcode. You may choose or change your personal
passcode at any time by following these steps:
Open the safe as described in “Open Safe with
Passcode & Key” section on the following page.
Press

* and enter the factory pre-set Passcode

1-2-3-4-# to open the safe for the first time or your
user programmed Passcode if the pre-set Passcode
has already been changed.

1. Locate the memory button marked on the

inside of the door.

2. Using a pen or other blunt tip, quickly push

and release the memory button.

After you hear a

“beep”

, the LCD display will read

“OPEN” and you may begin entering your personal
code (from 3 to 8 numbers) followed by the # button.

4. Next, you will hear a longer

“beep”

and the LCD

display will read “CODE”, indicating that your
personal code has been successfully programmed
and can now be used to open your safe.

Programming A Passcode

Important: SECURITY LOCKOUT PERIODS

For added security, the safe will automatically “Lockout” entry

for 5 minutes after three attempts to open with an invalid

passcode. After three more invalid attempts within this

time period, a one-hour “Lockout” period will begin. During

these “Lockout” periods, entry MUST BE MADE using the

emergency override key.

LCD Display Menu

Your new Digital Firesafe features an LCD display to assist in programming

and operating your safe. A menu of the codes is as follows:

Ready to enter your passcode

Passcode successfully programmed

Correct passcode entered

Incorrect passcode entered

Batteries (“AA”) must be replaced

MEMORY

BUTTON

LCD

DISPLAY

Use, Care and Maintenance

Safe Care and Maintenance

When properly maintained, your safe will continue to operate and accurately read the

authorized Passcode for many years. In order to ensure optimum performance of your

safe, please follow these simple precautions:

Battery Maintenance

1. Always purchase and use the batteries as specified by this User’s manual.

2. Always replace

all batteries at the same time. It is recommended to replace all

batteries at least once a year or sooner depending on amount of use.

3. Always clean the battery contacts in the battery compartment and on the

batteries before installing new batteries.

4. Always make sure all batteries match the polarity (+ and -) signs in the open

battery compartment.

5. If your safe will not be used for an extended period of time, it is recommended

that you remove the batteries.

6. Always promptly remove and properly discard of all used batteries.

Clean Hands

- Never attempt to operate the digital keypad if your hands have excessive

dirt, debris or liquids on them.

Clean Safe

– To clean the surface of your safe, it is recommended that you use a mild

cleaner (e.g., window cleaner) to avoid scratching or discoloring the surface. Always wipe

dry and NEVER use abrasive cleansers on the safe or digital keypad.

For future reference, store this Operation and Installation Guide in a secure area away

from the safe. DO NOT DISCARD!

Appropriate Use of Your Safe

First Alert

fire safes protect paper records and many other valuables

Verified fire protection for: Memory sticks, CD’s & DVD’s, USB Drives.
This product is NOT INTENDED to protect audio or video cassettes, floppy discs, data

cartridges, film and photos or photo negatives.
Your safe must be closed and latched in order to properly protect the contents from fire.

Moisture Warning

We recommend that you place delicate items such as pictures or intricate jewelry into an

air-tight container

before

storing them in your safe. Avoid placing your safe in areas of

high humidity. For optimum performance, the safe should be opened and aired out for at

least 20 minutes every two weeks.

Firearms Warning

This safe is

not

designed to store medication, items with combustible content, guns or