4
5
English
English
OPTIONAL NORMAL WEIGHING MODE
(by passing parameter setting)
1. Auto step on weighing
1.
2.
3.
4.
1. install battery and place the
scale on flat floor
2. step on the weighing platform
3. display your weight
4. Digits flash, stabilized and
locked
2. Consecutive add-on weighing
after digits stabilize, more additional loadings can be conducted. Ensure each add-on loading has to
exceed 2kg to get a new reading.
Example: If you want to get a weighing value of your baby, you can weigh yourself first, and then
hold your baby together, without stepping off the scale. then you will get the total weight reading.
subtracting the previous reading of yourself from the new reading, you will get the difference as your
baby‘s weighing value.
1.
2.
3.
1. Digits flash, stabilized and locked
2. hold your baby without stepping off the scale.
3. display total weight.
WARNING INDICATIONS
low Battery indication
the battery power is running low, please replace with a new battery.
Over-load indication
the weighing subject on the platform exceeds the maximum capability of scale. please
step off to avoid damage.
low Fat% indication
the Fat% is too low. please lead a more nutritional diet and take good care of yourself.
high Fat% indication
the Fat% is too high. please watch your diet and do more exercise.
Re-test
Error exists, please re-test to get the correct result.
FAT/HYDRATION/MUSCLE/BONE/CALORIE MEASURING MODE
(1) Setting personal parameters
1. At the first time when you install battery and switch on, all default parameter are set as follow:
Memory gender
height
age
1
Male
165cm/5‘05.0“
25
2. parameters can be set in the following range:
Memory gender
height
age
1~12
male/female
100~250cm 3‘03.5“~8‘02.5“
10~100
3. parameter setting
power off
press sEt
(ON/SET) to
switch on
press
to select
user code
default
parameters
Press SET (ON/
SET) to confirm
and prompt to
next setting
Press SET (ON/
SET) to confirm
and prompt to
next setting
press
to select
gender
press
to set height
Press SET (ON/
SET) to confirm
and prompt to
next setting
press
to set age
tap on the
scale platform
lcd shows „0.0“
auto off after several seconds
power off
Example: the 3rd user, female,
168cm, 28 years old, can set her
parameters as follow:
nOtE:
• During parameter setting, if idle
for 6 seconds, the parameters
already set will be memorized
automatically and lcd shows
„0“, meaning body fat measuring
will be started.
• If LCD prompt to show „0“
during parameter setting, press
SET (ON/SET) for 3 seconds
to return setting mode, then
you can set user code, gender,
height and age
(2) To Start Measuring
power off
press sEt
(ON/SET) to
switch on
show parameters of
the last user or default
parameters
press
to select user code
or reset parameters
tap on the
scale platform
lcd shows „0.0“
step onto weighing
platform gently
(both feet touching
with metal
electrodes)
Wait until the digits
stabilize
Weight readings
locked and flash once
Measuring...
Measured results (Repeat for 3 times and saved. The reading will re-
appear at next measuring for users‘ reference): Weight: 52.8kg, Fat status,
Fat 23.8%, Hydration 52.3%, Muscle 37.2%, Bone 12%, Calorie 1840.
shut down automatically
(Make sure
your feet are
touching with
metal
electrodes on
the scale
platform, or
body fat can
not be
measured.)
to ensure
accuracy,
please remove
your shoes &
socks before
stepping on.
Example:
the 3rd user,
female, 168cm,
28 years old
can measure
as follow:
