FCC REqUIREmENTS
This equipment complies with Part 68 of
the FCC rules and the requirements ad-
opted by the ACTA. On the base unit of this
equipment is a label that contains, among
other information, the FCC Registration
Number and Ringer Equivalence Number
(REN) for this equipment. IF REQUESTED,
THIS INFORMATION MUST BE GIVEN TO
THE TELEPHONE COMPANY.
The REN is used to determine the number
of devices that may be connected to
a telephone line. Excessive RENs on a
telephone line may result in the devices
not ringing in response to an incoming
call. In most but not all areas, the sum of
RENs should not exceed five (5.0). To be
certain of the number of devices that may
be connected to a line, as determined by
the total RENs, contact the local telephone
company. For products approved after July
23, 2001, the REN for this product is part
of the product identifier that has the
format US: N7KMM09BT110P.
The digits represented by 09B are the
REN without a decimal point (e.g., 03 is a
REN of 0.3). For earlier products, the REN
is separately shown on the label.
If your equipment causes harm to the
telephone network, the telephone com-
pany may discontinue your service.
If you experience trouble with this
telephone equipment, please contact the
following address and phone number for
information on obtaining service or repairs.
The telephone company may ask that you
disconnect this equipment from the net-
work until the problem has been corrected
or until you are sure that the equipment is
not malfunctioning. This equipment may
not be used on coin service provided by
the telephone company. Connection to
party lines is subject to state tariffs.
TASq Technology
1169 Canton Road, Marietta, GA 30066
(800) 827-8297
A plug and jack used to connect this
equipment to the premises wiring and
telephone network must comply with the
applicable FCC Part 68 rules and require-
ments adopted by the ACTA. A compliant
telephone cord and modular plug is
provided with this product. It is designed
to be connected to a compatible modular
jack that is also compliant. See installation
instructions for details.
NoTICE: This equipment meets the
applicable Industry Canada Terminal
Equipment Technical Specifications. This
is confirmed by the registration number.
The abbreviation, IC, before the registra-
tion number signifies that registration
was performed based on a Declaration of
Conformity indicating that Industry Canada
technical specifications were met. It does
not imply that Industry Canada approved
the equipment.
AVIS: Le présent matériel est conforme aux
spécifications techniques d’Industrie Cana-
da applicables au matériel terminal. Cette
conformité est confirmée par le numéro
d’enregistrement. Le sigle IC, placé devant
le numéro d’enregistrement, signifie que
l’enregistrement s’est effectué conformé-
ment à une déclaration de conformité et
indique que les spécifications techniques
d’Industrie Canada ont été respectées. Il
n’implique pas qu’Industrie Canada a ap-
prouvé le matériel.
NoTICE: The Ringer Equivalence Number
(REN) for this terminal equipment is 09B.
The REN assigned to each terminal equip-
ment provides an indication of the maxi-
mum number of terminals allowed to be
connected to a telephone interface. The
termination on an interface may consist of
any combination of devices subject only to
the requirement that the sum of the Ringer
Equivalence Numbers of all the devices
does not exceed five.
AVIS: L’indice d’équivalence de la sonnerie
(IES) du présent matériel est de 09B.
L’IES assigné à chaque dispositif terminal
indique le nombre maximal de terminaux
qui peuvent êtreraccordés à une interface
téléphonique. La terminaison d’une inter-
face peut consister en une combinaison
quelconque de dispositifs, à la seule condi-
tion que la somme d’indices d’équivalence
de la sonnerie de tous les dispositifs
n’excède pas 5.
FCC STATEmENT
This Equipment has been tested and
found to comply with the limits for a Class
A digital device, pursuant to part 15 of
the FCC Rules. These limits are designed
to provide reasonable protection against
harmful interference when the equipment
is operated in a commercial environment.
This equipment generates, uses, and can
radiate radio frequency energy and, if not
installed and used in accordance with the
instruction manual, may cause harmful
interference to radio communications.
Operation of this equipment in a
residential area is likely to cause harmful
interference in which case the user will
be required to correct the interference at
his own expense.
MIS-FDSER-SUGDE
© 2010 First Data Corporation. All Rights Reserved
