8
SET BUTTON
1.
Press and hold “Set Button” for 5 seconds to enter Programming Mode.
2.
When valve is in Programming Mode, press “Set Button” to confirm setting and advance to
next menu option.
ADVANCE BUTTON
1.
Press and hold “Advance Button” for 5 seconds to initiate an immediate regeneration cycle.
2.
Press and release “Advance Button” during a regeneration cycle to immediately advance the
valve to the next step in the regeneration process.
3.
When the valve is in Programming Mode, press the “Advance Button” to move the cursor.
UP BUTTON
1.
When the valve is in the Programm
ing Mode, press “Up Button” to adjust setting.
CITY Series Programming
Advance Button
FIGURE 4: Front of Electronic Meter Timer
Assembly
