First Water Flex-Chlorinator, Operation Manual

4

Operation and Maintenance Safety

NEVER position the Flex-Chlorinator directly over the Chlorine Dilution 

Container. The suction hose from the Chlorine Dilution Container to the 

Flex-Chlorinator should fall below the top of the container, then rise back 

up to the injector (see installation diagrams).

NEVER leave the Flex-Chlorinator or water lines full of water during freez-

ing temperatures. Visually inspect the Flex-Chlorinator and water system 

for leakage.

Warning! Risk of Chemical Overdose

To reduce risk, follow proper installation methods and instructions. The 

point of chemical injection should be beyond all pumps, filters and heat-

ers.

NEVER use chlorine with fragrance, perfume of detergent additives.

Notice:

This injection system and its components have been tested for use with 

Sodium Hypochlorite (5-15%).

The Flex-Chlorinator provides a means of delivery for chemicals in gen-

eral. First Water Systems, Inc. does not suggest or recommend ways or 

procedures for using any chemical.

First Water Systems, Inc. is not responsible for injury incurred by the mis-

use or improper handling of chemicals.

Specifications

Water Motor Specifications

Water Flow...................................1GPH - 13GPM

Pressure.......................................2 psi - 80 psi

Max. Temp...................................110 F (43.3 C)