Thank you for choosing the
At-Home Disinfectant Maker
from
FirstHealth. This user manual will provide instruction to help you get
the most out of this product. Please read all instructions carefully.
How
T
o
U
se:
1. Ensure the bottle is empty of any objects, then fill it with tap water.
Measure out the appropriate amount of salt (see guide) and pour it in.
Shake gently to dissolve.
2. Gently screw on the spray nozzle, leaving some slack so that air can
escape.
3. Connect the USB Charging Cable and plug into power. The device will
emit a buzz to confirm connection.
4. Press the base's power button to begin. You will see the colored lights
change and bubbles form during the 10 minute process.
5. The device will buzz 3 times when complete. Remove the cable and
tighten the spray nozzle. You are now ready to disinfect!
6. When finished, empty, rinse, and dry the bottle inside and out. Store in
a cool, dry area.
Solution Concentration Guide
Standard Concentration (Most Uses)....Add 0.48g Salt
High Concentration (Floor Mopping)....................0.80g
Low Concentration (Child and Baby Products)....0.35g
Troubleshooting
-If you have difficulty spraying, be sure the adjustable nozzle is in the
correct position. Rotate if necessary until you can spray easily.
-If the hydrolyzing process generates fewer bubbles than normal, you may
need to clean the base's electrodes. Pour enough lemon juice, citric, acid,
potable vinegar or another non-toxic cleaning agent into the bottle to
cover the electrodes. Let it soak 1-2 hours, then rinse with clean water and
air dry in a well-ventilated area.
3
