background image

PERFECT WALKER II UNBOX & SET-UP GUIDE

2

Unpack the Perfect Walker II and lay out the 

parts for easy access.

STEP 1

STEP 2

STEP 3

STEP 4

Loosen and remove the 4 large thumbwheel 

screws from the black lower frame. 

Fold out each of the 4 wheel/leg combinations to their full positions, ensuring that the screw holes 

are lined up between the frame and the legs. 

Insert the 4 thumbwheel screws that were removed in Step 2 into 

the 4 holes in the lower legs.  The thumbwheel screws are to be 

inserted from the exterior side of the frame.  The bolts may be 

a little tight when inserting into the holes - this is normal.  Once 

inserted as far as they can go, screw them into place and lock the 

wheels into place.

Thumbwheel

(x4)

Unfold the Perfect Walker II so that the seat is locked into 

place. Push firmly down on both sides of the seat until you 

hear the seat click into its locked position.  It will look like 

the image below when locked into place.

STEP 5

Reviews: