SH2000
82.150 Rev 100315
15
6 SETTING UP
A GOOD BAG SEAL IS OBTAINED BY THE VARIABLE INTERACTION OF
THREE OPERATING FACTORS ON THE MACHINE:
1) Throughput SPEED (A)
2) TEMPERATURE (B) of the Sealing Air.
3) The HEIGHT (D) of the Heating
Capsule Outlets (See Section 6.12).
4) CORRECT PRESSURE (C) between
the Pressure Wheels.
6.1 Throughput Speed
6.1.1
After installing the Sealer, check that the speed of the machine and the infeed
conveyor are synchronised.
6.1.2
If conveyor and machine speeds are not synchronised, the bags may tip, which in
turn will give partial or no sealing. This effect is most noticeable on narrower bags.
A
6.1.3
If the conveyor speed cannot be changed to correspond to the sealer, then the
sealer speed (If fitted) has to be changed to match the conveyor. This may require
the temperature to be adjusted for best seal.
Conveyor Faster than Sealer
Bag tips back
Conveyor Slower than Sealer
Bag tips forward
SETTING UP
C
B
D
Summary of Contents for Saxon SH 2000
