SH2000
82.150 Rev 100315
23
6.9 Adjustment to Pressure Wheels
Changing bag thickness may require some adjustment to the Pressure Wheels
6.9.1
Pressure Wheels are adjusted OUTWARDS for THICK BAGS
6.9.2
Pressure Wheels are adjusted INWARDS for THIN BAGS
It is necessary to follow this procedure for each bag test run
6.9.3
SET PRESSURE HIGH ON THE ADJUSTER BEFORE MAKING ADJUSTEMNT
by screwing C into B.
6.9.4
Insert Allen Key into Clamp
Screw (D) and slacken.
6.9.5
Turn the Barrel (B)
slowly:
6.9.6
CLOCKWISE to move
Spindle INWARDS
6.9.7
ANTICLOCKWISE to
move Spindle
OUTWARDS
6.9.8
Tighten Clamp Screw
(D) and remove Allen Key
6.9.9
Reset the Pressure Adjuster
to normal working pressure by unscrewing (C) from (B).
6.9.10 The gap between Spindle (A) and the Pressure Wheel Carriage must not be less
than 0.25mm.
A
Spindle
B
Barrel
C
Spring Adjuster
D
Clamp Screw
The difference in adjustment required between the thinnest and
thickest bags may be as little at 1/8 or 1/4 turn of (B)
If bag sealing is incorrect after this operation s
ee “SETTING UP” (Section 6).
C
D
IMPORTANT
SETTING UP
B
A
Summary of Contents for Saxon SH 2000
