Page 4
For technical questions, please call 1-888-866-5797.
Item 63298
Sa
FE
ty
Op
E
ra
ti
O
n
Maint
E
nanc
E
aSSEM
bl
y
Sa
FE
ty
Op
E
ra
ti
O
n
Maint
E
nanc
E
aSSEM
bl
y
3. Remove the R-Clip (23) and Flat Washer (8) from one end of the Short Lift Arm Rod (25).
Remove the Cotter Pin (12) and Flat Washer (8) from one end of the Long Lift Arm Rod (24).
Place the Lower Lift Arm (21) in position, then insert the Short Lift Arm Rod through the
bracket on the Upper Lift Arm Assembly (26) and the front end of the Lower Lift Arm.
Replace the Washer over the end of the Short Lift Arm Rod and use an R-Clip to secure the Rod in place.
Raise up the previously installed Support Bars. Insert the Long Lift Arm Rod through the Support Bar, the
shaft of the Upper Lift Arm Assembly, the rear end of the Lower Lift Arm, and the other Support Bar.
Replace the Washer over the end of the Long Lift Arm Rod and insert the
Cotter Pin and bend it over to secure the Rod in place.
lower lift
lower lift
arm (21)
arm (21)
Upper lift arm
Upper lift arm
assembly Shaft
assembly Shaft
Short lift arm rod (25)
Short lift arm rod (25)
long lift arm rod (24)
long lift arm rod (24)
Support
Support
bar (11)
bar (11)
cotter
cotter
pin (12)
pin (12)
r-clip
r-clip
(23)
(23)
Washer
(8)
Washer (8)
Washer (8)
lower lift arm
lower lift arm
in place
in place
Support bar
Support bar
in place
in place
Short lift arm rod
Short lift arm rod
attachment
attachment
long lift arm rod
long lift arm rod
attachment
attachment
Upper lift arm
Upper lift arm
assembly
assembly
Step 3: attach lower lift arm to Upper lift arm assembly and Support bars
