FISCHER 86381, Instruction Manual

Step 1: 

Attaching the axle bracket

Step 2: 

Attaching the lower  

tow bar part

Step 3: 

Attaching the wheel 

deflectors

Step 4: 

Attaching the wheels

Important!

Operating and safety precautions

GB

Attach the two axle brackets (part no. 15) by placing 

each of the axle bracket metal plates (part no. 11)  

in the plastic tray (part no. 18), putting 2 M6x35 screws 

(part no. 9) in the square aperture and screwing tight 

the axle bracket with the washer (part no. 13) and the 

nut (part no. 20) from the outside.

Push the axle (part no. 2) through the aperture in the 

lower tow bar part (part no. 3). 
Then attach the front and rear tow bar brackets  

(part no. 16) by placing each of the tow bar bracket 

metal plates (part no. 12) in the plastic tray (part no. 

18), putting 2 M6x25 screws (part no. 8) in the square 

aperture and screwing tight the tow bar bracket with 

the washer (part no. 13) and nut (part no. 20) from the 

outside. 

Place the two deflectors (part no. 1) on the lower tow 

bar part. Put the two M6x70 screws (part no. 7) through 

the deflector and the lower tow bar part and screw 

these tight with the washer (part no. 13) and the nut 

(part no. 20).

Put a wheel bush (part no. 21) on both the insides and 

outsides of both wheels (part no. 5) and press them in 

firmly.
Then push both wheels on to the axle and screw the 

two socket head screws (part no. 10) with the washer 

(part no. 22) on to each end of the axle.
Please make sure that the self-locking screw is securely 

tightened. Check regularly that the self-locking screw is 

properly seated. Then put both the end caps on.