15
Fig. 48
C. Position tabs on side bracket to fit into slots on the cart (be aware of
pinch points)(Fig. 44-45). When complete, the landing ledge should
sit flush on the top of the cart (no gap)(Fig. 46).
D. Secure the head to rear of cart (Fig. 47) with (2) Phillips-head screws
provided (10-24 x 1/2”).
E. Install remaining (3) screws (10-24 x 1/2”) into the front of head to
the cart (Fig. 48).
Fig. 45
PINCH POINT
Fig. 47
Fig. 44
Fig. 46
INSTALLATION
SINK DRAIN ASSEMBLY INSTRUCTIONS (OPTIONAL)
