16
10. Feed the water supply hose through the center divider hole,
down to the bottom opening of the cart (Fig. 49). Place the
end of the water supply hose in the snap-lock clip and lock it
in place (Fig. 50)
11. Attach the water hose adapter to the water supply hose. (Fig.
51).
NOTE:
Make sure you have the supply connection in accordance with
local codes.
12. Feed the air vent tube over the center divider and attach it to
the brass fitting located at the top of the water tank. (Fig. 52
and 53).
Fig. 49
Fig. 50
Fig. 51
Water Hose
Adapter (water
supply)
Fig. 52
Fig. 53
INSTALLATION
SINK DRAIN ASSEMBLY INSTRUCTIONS (OPTIONAL)
