INSTALLATION GUIDE
ACCESSORY DOOR PANELS FOR DISHWASHER
INSTALL INFILL BRACKET
1
z
Open the door.
z
Push a small screwdriver
downward through the
screw hole from the
top of the appliance to
remove the plastic plug.
z
Do not install the
mounting bracket!
2
z
Remove two screws pre-installed
from the infill bracket.
z
Use the same screws to attach
the bracket to the top of the
appliance. Do not tighten fully.
side wings
z
Push the appliance into the cabinetry.
Ensure the infill bracket do not hit the top of the
cabinet while pushing.
z
Slide the side wings of the bracket outward to
cover the hollow space.
z
Hand tighten the two screws for the infill bracket
and reinstall the hole plugs.
3
4
Before installing the standard (tall) door panel, an infill bracket must be attached as a cosmetic feature to fill the gap between the
top of the dishwasher and underside of cabinet top. The infill bracket is not needed for cabinets using ADA door panels.
ALIGN DISHWASHER IN CABINETRY
ALIGN AND SECURE DOOR PANEL
z
Fix slider bracket
(See step 1 of ADA door panel)
z
Hang door panel
(See step 2 of ADA door panel)
z
Align door panel
Slide the standard door panel up so that the distance
between the top of the door panel and control panel
is 1.65” (42mm).
The panel can only slide upwards and can be lifted
off and reinstalled if required.
z
Check door balance
(See step 4 of ADA door panel)
z
Secure door panel
(See step 5 of ADA door panel)
1.65” (42mm)
REMOVE HOLE PLUGS
The selected handle must be fitted to the panel prior to installation onto the product.
STANDARD (TALL) DOOR PANEL (82084)
595703A 12.19
