8
8
LOCATION OF PRODUCTS INTO ALCOVE — RIGHT PRODUCT
1
Roll the right hinge refrigerator into the right hand side of the alcove until the refrigerator
makes contact with the joiner bracket.
IMPORTANT!
For flush installation: check for flushness of the refrigerator with the surrounding
cabinetry (refer to separate ‘Installation guide’ booklet supplied with your refrigerator)
on how to achieve flushness.
2
Adjust the refrigerator height (refer to separate ‘Installation guide’ booklet supplied with
your refrigerator).
3
Screw two M5 x 12 Socket head cap screws to connect the alcove bracket to the joiner
bracket (refer to
A
).
4
If the refrigerator is not flush, further loosen the top screws of the alcove attachment
bracket if required and move the bracket in a forward to back motion to suit (refer to
B
).
5
Recheck refrigerator flushness (refer to separate ‘Installation guide’ booklet supplied with
your refrigerator). Once satisfied with flushness, tighten top screws fix an additional
#8 x 16 mush washer screw (refer to
C
).
SCALE 1:10
SCALE 2:5
A
SCALE 2:5
C
B
