9
9
LOCATION OF PRODUCTS INTO ALCOVE — LEFT PRODUCT
A
IMPORTANT!
Open the door of the right hinge refrigerator.
1
Roll the left hinge refrigerator into the left hand side of the alcove until the refrigerator
makes contact with the joiner bracket (refer to
A
).
IMPORTANT!
For flush installation: check for flushness of the refrigerator with the adjacent refrigerator
(refer to separate ‘Installation guide’ booklet supplied with your refrigerator on how to
achieve flushness).
2
Open the left hinge refrigerator door to access the brackets (refer to
B
).
3
Adjust the refrigerator height (as per the separate ‘Installation guide’ booklet supplied with
your refrigerator), so holes in the top trim are in line with the holes in the joiner bracket
(refer to
C
).
– Note: for clarity of drawing, top trims are not shown.
4
Screw two M5 x 12 Socket head cap screws to fix left hand top trim to the joiner bracket
(refer to
C
).
B
C
