28
CLEANING AND CARE
When cleaning the shelf above the vegetable bins, we recommend that you do not
disassemble the Humidity Control System from the shelf.
In the event that the humidity control lid (plastic
lid) and humidity slides become separated
from the glass shelf, follow these instructions to
reassemble.
Humidity
Slides
Retainer
Humidity Control System cleaning
1
Turn shelf upside down.
2
To attach humidity slides onto
shelf front corners, fit bottom
clips into shelf front trim. Next,
slide sideways towards shelf
until arm clips onto glass.
3
To attach humidity control lid —
with text facing you, align lid
with front of shelf. Hold lid
vertically and fit front end
into retainer on shelf. Ensure
lid fits into retainer as well as
underneath humidity slides.
4
At the sides of the shelf, adjust
humidity slide tabs so that the
plastic lid is between the shelf
and the tabs.
5
If clips on back of shelf are
present, fasten lid with rear clips.
Ensure that the cover is fully
secure at front and back of shelf.
