11
INSTALLATION INSTRUCTIONS
Positioning your refrigerator
Your Fisher & Paykel ActiveSmart™
refrigerator is fitted with front and rear
rollers to allow you to easily move your
refrigerator forward and backward.
Avoid moving your refrigerator sideways
to prevent damaging the rollers or the
floor covering surface.
1
Your refrigerator will arrive with the front feet wound up making moving the product
into its final location a simple task.
2
Roll the refrigerator into its final position making sure there is the correct air gap
between the product and surrounding cabinetry. See minimum clearance in cabinetry
dimensions table.
3
Adjust the front feet down until the refrigerator is leaning backward with the front
approximately 3/8” (10mm) higher than the back. This will ensure a good door
closing action.
Levelling of refrigerator doors
●
●
Open the door that is out
of alignment.
●
●
Lift the door upwards.
●
●
Clip the spacer onto the centre
hinge pin
A
.
●
●
Close the door to recheck alignment.
Raise the front of
the refrigerator
Lower the front of
the refrigerator
Refrigerator feet
Example only
●
●
A
